Product name:Calf dehorner
Product model: GF-CD-004
Product introduction: The dehorner uses the inlay heating wire copper rod core to heat the horns internally. It can work continuously for more than 20 hours. It can accurately and quickly burn the growth points of the horns by covering the corner holes at the end of the soldering head. So as to achieve the effect of chamfering.
The benefits of dehorning:
1. Dehorned cattle are good for management, especially for grazing cattle. To a certain extent ensure the safety of the breeder.
2. The shed area and feeding space required for dehorned cows are small. This is an important management measure for cattle farms that are fenced and can increase the density of cows.
3. After the horns are removed, the docile personality is gentle, which reduces the damage caused by the fighting between the cattle and the cattle when there are horns, which leads to a series of stress on the cows such as loss of appetite and decreased milk production, which increases the economic benefits of the farmers.
Barrel length: 14cm
Voltage: 230V / 50Hz
1. Special copper head, caliber 1.8cm, conforming to horn shape, easy to install and remove.
2. Hanging metal hook, can be hung anywhere after heating to avoid burns.
3. The wire is 1.4 meters long to ensure safety.
How to use a calf dehorner:
When using the dehorner, it should be powered on for at least 5-10 minutes, then put the dehorner on the calf's horn and gently press it, and blanch the calf's horn for about 15 seconds. The time should not be too long, especially for young calves, or the heat will pass through the cranial cavity and damage the brain.
Selling Units: Single item
Single package size: 27X14X13 cm
Single gross weight: 1.630 kg
Lead Time :
|Quantity(Pieces)||1 - 10||>10|
|Est. Time(days)||15||To be negotiated|